| Stronghold |
| Hydraulic
Workhold Devices |
|
| Hydraulic
Workholding Devices |
DESTACO’s
workholding devices include many types of hydraulic
clamps that will handle most clamping applications.
All of our hydraulic clamps are ideal for applications where it is necessary for
the clamping arm to be moved away from the workpiece.
They perform the same function as clamping cylinders, but their ability to swing or retract out of the way of cutters, plus the advantage of
quick and easy part loading or unloading, makes them the perfect
choice for the jobs with special workholding needs.
|
|
|
| Swing/Pull
Camps |
Both swinging and clamping functions are performed by a single actuator:
as the clamp’s cylinder is retracted, the rod rotates,
causing the clamping arm to swing into position.
Clamping then takes place as the cylinder continues to retract, pulling the arm
against the workpiece. DESTACO features a family of Live Roller™
swing clamps. With this design, the swing mechanism uses a wide roller that follows a cam throughout the clamp’s stroke to provide the rotation.
The heattreated roller and cam provide increased service life in the toughest applications.
DESTACO offers a wide range of mounting and plumbing options.
Body styles include: threaded body, block body, cartridge and manifold mount.
Singleacting and doubleacting versions are available.
In doubleacting, there is a choice of clamping stroke
lengths in some sizes.Arms clamp securely to the piston rod to minimize deflection.
Choose from a standard length arm or an easily modified long arm to best fit your application.
See table of contents
|
|
|
| Edge
Clamp |
DESTACO’s
edge clamp performs three functions: locating the workpiece, clamping horizontally against secondary locators, and clamping vertically against the primary locating surface.
This combined horizontal and vertical clamping force can locate and secure many parts with no other clamps being needed.
|
|
|
| Thru-Hole
Hydraulic Ram |
By inserting a rod through the hollow piston, these cylinders can be
used to push or pull depending on the orientation of the ram.
They will actuate a rod of any length or shape and are extremely effective
in translating power to a remote location.
Greater forces are generated in these ThruHole Rams because of their larger piston area.
Thru-Hole
Hydraulic Ram............................54
Thru-Hole
Hydraulic Ram.............................55
|
|
|
| Collet
Chucks |
Collet Chucks are perfect for machining operations on round,
square or hex stock. They are instant acting and provide positive
holding (up to 5,000 lbs.) for even the most rugged machining operations.
In operation, the pressurized drawbar exerts a downward force causing the collet jaws to squeeze together on the workpiece.
An adjustable depth stop can be set to facilitate fast loading of shorter pieces.
Collet
Chucks – Single Cavity........56
Collet Chucks – Triple Cavity.........57
|
|
|
| |
|
|
