DE
STA CO's Pull Cylinders retract when hydraulically pressurized
to exert a pulling force on clamping elements or mechanisms. For
straight pull applications only, they allow the user to design
a cylinder into a fixture while maintaining the replaceability
and long life of a heat treated, corrosion resistant cylinder
body. Designed for single acting systems only, the cylinder's
return spring is built into the piston and requires no additional
fixture space.
The
pull cylinders are designed for cartridge mounting in a cavity
supplied by the fixture builder. The required cavity is simply
a cylindrical bore with a properly deburred pressure port intersecting
it, providing the fluid connection. The depth of the bore matches
nominal plate thickness so the cylinder can be easily "sandwiched"
between two plates if desired. Where possible, pins inserted in
the back of the piston are provided. These pins are guided by
holes drilled in the sub-plate and will prevent cylinder rotation
when adjustments are made. A breather hold should always be provided
and may be combined with the pin holes where appropriate.
|