 |
During
clamp retraction, the cylinder rod rotates 90 degrees causing
the clamping arm to swing into position. Clamping then takes place
as the rod continues to retract in a straight line, pulling the
arm against the workpiece. The optional arm clamps securely to
the piston rod to reduce fatigue and deflection. Arms may be easily
modified or replaced with custom arms.
Available
in both single acting and double acting models, their top port
design allows easy access to plumbing connections. Breather on
single acting models may be replaced with tubing for remote venting.
Special rod wiper seals and a unique drainage system channels
contaminants away from the clamp.
Both
the single acting and double acting Live Roller models share the
same outside dimensions making them completely interchangeable.
Available with 90 degree left or right hand rotation or with guided
straight pull.
Features:
-
Corrosion resistant construction, featuring heat
treated, chromeplated piston rods
- Live Roller™
swing mechanism for increased service life
- PowerTech™
treated body and hardened cam for long wear and corrosion resistance
- Straight
pull capacity 5,900 lbs. At 5,000 psi max
|
|
