 |
 |
 |
Series
500-LSC Option
A spring clip and urethane bumper assembly (LSC) is also
available in Model 506 and 508 to hold the clamp arm open under spring
tension only.
 |
| Model No. |
Dimensions (LSC Option - with spring clip & bumper) | ||||||||||||||
| A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | |
| 506-LSC-HP | 5.38 | 2.25 | .63 | 2.63 | .25 | 1.13 | .77 | 1.45 | 4.00 | .88 | 1.75 | 2.50 | 2.45 | .38 | .44 |
| 508-LSC-HP | 6.75 | 2.63 | .75 | 3.09 | .31 | 1.38 | .61 | 1.67 | 5.25 | 1.00 | 2.00 | 2.88 | 2.99 | .50 | .44 |
Series
500-POL Option
Models 505, 506, & 508 are also available with a positive
open latch (POL) device to prevent accidental clamp closing before the
workpiece is in position.
 |
| Model No. |
Dimensions (POL Option - With positive open latch device) | ||||||||||||||
| A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | |
| 505-POL-HP | 5.06 | 1.81 | .48 | 2.19 | .19 | .88 | .75 | 1.13 | 3.25 | .75 | 1.50 | 2.16 | 1.94 | .31 | .44 |
| 506-POL-HP | 6.31 | 2.25 | .63 | 2.63 | .25 | 1.13 | .77 | 1.45 | 4.00 | .88 | 1.75 | 2.50 | 2.45 | .38 | .44 |
| 508-POL-HP | 7.75 | 2.63 | .75 | 3.09 | .31 | 1.38 | .61 | 1.67 | 5.25 | 1.00 | 2.00 | 2.88 | 2.99 | .50 | .44 |
Series
500-FB Option
Models 505, 506, & 508 are also available with a (FB)
base, with two dowel holes and one screw hole. Can be added and welded
into set positions.
 |
| Model No. |
Dimensions (FB Option - With dowel hole mounting base) | ||||||||||||||
| A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | |
| 505-FB | 4.25 | 1.81 | .48 | 2.19 | .19 | .88 | .75 | 1.13 | 3.25 | .75 | 1.50 | 2.16 | 1.94 | .31 | .44 |
| 506-FB | 5.38 | 2.25 | .63 | 2.63 | .25 | 1.13 | .77 | 1.45 | 4.00 | .88 | 1.75 | 2.50 | 2.45 | .38 | .44 |
| 508-FB | 6.75 | 2.63 | .75 | 3.09 | .31 | 1.38 | .61 | 1.67 | 5.25 | 1.00 | 2.00 | 2.88 | 2.99 | .50 | .44 |
