 |
 |
 |
SERIES 219, 229
Featuring a unique cam action, these clamps will hold workpieces of inconsistent height. Ideal for castings or forgings, these models - once set for the nominal or average piece height - allow for a 5/32” deviation larger or smaller than average. The overall clamping ranges is 5/16” for Model 229 and 13/64” for Model 219. Accommodates any 1/2” spindle. Furnished with flanged washers (247109), 1/2-13 x 3 5/16” hex head spindle and red vinyl grip.
52190
Model 219
Open bar
Flanged base
52290
Model 229
Open bar
Flanged base
SERIES 518
This model features a forged hold-down bar and ergonomic plastic grip. The forged hold-down bar can be cut or welded to suit the user's fixture. One of the major features of this clamp is the greater clearance under the bar. due to the bar design, there is twice the normal clearance in this size clamp.
| 55180 Model 219 Open bar Flanged base |
 |
| Model No. |
EDP No. |
Holding Capacity |
Weight | Handle Moves |
Bar Opens |
Dimensions | |||||||||
| A | B | C | D | E | F | G | H | J | K | ||||||
| 219 | 52190 | 350 lbs. | 1.75 lbs. | 180° | 115° | 7.50 | 5.75 | 1.56 | .75 | 1.50 | 1.50 | 2.25 | 4.25 | .28 | 2.50 |
| 229 | 52290 | 1000 lbs. | 2.59 lbs. | 180° | 115° | 9.94 | 7.13 | 2.06 | .88 | 2.00 | 1.88 | 2.75 | 5.25 | .33 | 2.75 |
| 518 | 55180 | 500 lbs. | .82 lbs. | 75° | 90° | 6.88 | 4.28 | 2.50 | 1.00 | .88 | 1.50 | 1.38 | 2.63 | .29 | - |
