For Product Information Call M J Vail Company
HYDRA-DYNE ACTUATORS
Positive Locking Clamp

Model 70810

Hydraulic Positive Locking Clamps speed die changeovers and part load/unload tasks for application requiring up to 14,200 lbs. of clamping force. The unique design offers a consistency of exerting force not possible with other manual clamping methods.

They accommodate die plate or workpiece thicknesses from 1" to 2.50" - without the added cost and setup time associated with riser plates.

Each of these compact Hydra-Dyne® clamps has one bolt located close to clamped surface for maximum mechanical advantage. The bolt anchors to a bolster plate T-slot for quick positioning, then a knurled nut hand-tightens the clamp over the edge of a part or plate. The unit mechanically locks under pressure to provide safety even if hydraulic pressure fails, and it requires hydraulic pressure to unclamp. Each unit features an indicator pin for actuation verification.

The Positive Locking Clamps are similarly easy to unclamp and remove from the die plate or workpiece.

Specifications:
Bore - 1.000 in.
Effective Area - 0.785 in.
Stroke - 1.125 in.
Displacement - 1.770 cu. in.





Hydraulic Pressure Clamp Force (Maximum using 3/4-10 grade 8 T-Bolt)
1.50 in. Height 2.00 in. Height 2.50 in. Height
500 psig 900 lbs. 1000 lbs. 1100 lbs.
1000 psig 2000 lbs. 2100 lbs. 2300 lbs.
1500 psig 3100 lbs. 3300 lbs. 3600 lbs.
2000 psig 4300 lbs. 4700 lbs. 4900 lbs.
2500 psig 5600 lbs. 5900 lbs. 6400 lbs.
3000 psig 6900 lbs. 7400 lbs. 7800 lbs.
3500 psig 8400 lbs. 9000 lbs. 9600 lbs.
4000 psig 9900 lbs. 10600 lbs. 11000 lbs.
4500 psig 11200 lbs. 12100 lbs. 12400 lbs.
5000 psig 12500 lbs. 13500 lbs. 14200 lbs.
Note: Minimum clamping height 1 in.
Call Us
Toll Free! 1-800-526-6003

M.J. Vail Company
10 Ilene Court - Suite 4 - Hillsborough, New Jersey 08844  USA
Phone Toll Free-1 800 526-6003 * In NJ- 908 359-6000
FAX- 908 359-0518