|
These
hydraulically operated Collet Chucks are perfect for machining operations
on round, square, or hex stock. They are instant acting and provide
positive holding (up to 5,000 lbs.) for even the most rugged machining
operations. In operation, the pressurized drawbar exerts a downward
force causing the collet jaws to squeeze together on the workpiece.
An adjustable depth stop can be set to facilitate fast loading of
shorter pieces. For longer stock, the depth stop can be removed
and the stock fed directly through (see triple cavity mode below).
A locking screw is also provided to prevent collet rotation. Standard
5C collets (not furnished) are used for pieces up to 1 1/16"
dia. Both the single cavity and triple cavity models can be side
mounted.
Features:
- Positive
holding of round, square or hex-shaped pieces
- Fast
acting
- Accurate
repeatability
- Collet
locking screw prevents collet rotation
- Mounts
in any position
|
