 |
 |
 |
Model
849
A cam mechanism in the linkage of this unique clamp will
accommodate up to a 1/2" part size variation. Once set to the nominal
(or average) part size, parts up to 1/4" larger or 1/4" smaller
can be clamped without changing the setting. Bar opens 90°. Clamp
bar can be machined or altered to suit the application.
 |
| ALSO AVAILABLE | |
| With Magnetic Ring | Model 849-MR |
Model
858
The pneumatic version of Model 568, this heavy-duty model
uses forged alloy steel links and steel components machined to close tolerances.
Base is 1/2" thick steel plate. All pivot points have hardened bushings
fitted with hardened steel pivot pins. The 1 x 1 3/8 steel hold-down bar
may be cut, drilled and tapped or welded to adapt to application. Bar
opens 92°.
 |
| Model No. |
EDP No. |
Holding Capacity |
Weight | Bar
Opens |
Dimensions | |||||||
| A | B | C | D | E | H | J | Port
Size |
|||||
| 849 | 58490 | 2000 lbs. | 14.83 lbs | 90° | 4.81 | 18.44 | 2.00 | 3.00 | 2.25 | 4.25 | .41 | 1/8 NPT * |
| 858 | 58580 | 4000 lbs. | 16.11 lbs. | 92° | 7.13 | 18.09 | 3.84 | 4.25 | 2.75 | 4.88 | .41 | 1/8 NPT * |
*Restrictor fittings supplied that must be installed on clamp cylinder
Click here for Technical Information
